*Wiring:

Color-coded wiring in 25′ to 40′ lengths with quick connects fittings, meets federal standards for heat, pull and insulation, making installation easy.

*Solenoids:

They are custom designed , epoxy sealed and humidity resistant, thereby preventing shorting out. The solenoids lock the tabs in any position, eliminating driftback. Barb type hose fittings provide tight, secure connections.

*Motor:

A powerhouse with coated wirings and a thermal overload that resists temperature and amperage build-up. 1 3/4″ stack windings and top mounting eliminated oil leakage. The motor is mounted with stainless steel nuts and bolts, and is easily disassembled.

*Brackets:

Swivel type brackets allow cylinders to be mounted an adjusted to any angle. Knockout pins act as shear pins it tab strikes an object.

*Pump:

The built-in bypass is factory set at 400 P.S.I. tolerance held to .00025. Amperage doesn’t exceed 16 because the unit circulates oil, rather than stalling out or trying to pump additional pressure.

*Motor Cover:

4 1/2″ D x 6″ W x 11″H, high impact ABS plastic cover with a built-in oil reservoir mounts easily with two screws. The filler is located in front. Our cover protects the motor from occasional wash down.

*Cylinders:

Impact resistant, fiberglass reinforced nylon cylinders eliminates expansion and resists ultra-violet rays. Two expanding type seals, plus O-ring, eliminates high and low pressure leaks. Barbed cylinder fitting and an inserted tubular rod prevents hose blow-off and breakage.
A stainless steel spring retracts the cylinder when the boat is not in motion.

*Trim Tabs:

12 gauge 304 stainless steel trim tabs are available in standard and custom lengths. They are guaranteed against electrolysis, remaining strong and secure. The hinges prevent most spray and can be used for transom or bottom mounting.

*Hose:

Designed and manufactured with nylon-reinforced webbing and protective PVC coating. Rated at 2000 lb. burst pressure, 15′ of hose is supplied for your system. Entering the transom 6″ above the water line, the hoses are held securely with hose trim.
Stainless steel clamps hold the hose to barb fitting at the solenoid.

*One pint of biodegradable transmission oil, funnel and mounting hardware is supplied.

>Benefits:

*Level Ride & Increased Visibility –

These put your boat in proper trim and correct listing, making for a smooth, enjoyable ride for you and your passengers. A level ride improves the skipper’s visibility. You and your passengers are more secure and boating safety is improved immeasurably

*Environmentally Responsible –

Your smooth, level ride allows the engine to run more efficiently, increasing your mileage, saving fuel and stretching your boating dollars

*Longer Boat Life –

In proper trim you stay on plane at lower RPMs. Your engine doesn’t labor and engine life is extended substantially. Less wear and tear on your craft ensures more years of boating pleasure.

*Improved Performance –

The trim Tabs allow you to throttle back regardless of load and speed

US$120,000 (Current Market Value) or best offer (This has all fees and taxes included).

Boat kept in very good to new condition.

Comes with 2 Mercuiser 300hp Engines. The engines are brand new. Just broken in with 125hrs on each. Alpha 1 outdrives.

AC Installed.

Has front sleeping area, aft sleeping area both queen sized

Full Galley with microwave, stove, fridge.

Heads, toilet and shower.

Diving board, sun pad for the ladies.

Lots of really nice features.